Tracker 4WD L4-1.6L VIN 6 (1998)
Clutch Pedal Assembly: Service and Repair
REMOVAL PROCEDURE
IMPORTANT: Before removing the clutch pedal shaft arm from the clutch pedal shaft, place a reference mark on the clutch pedal shaft and clutch
pedal shaft arm to ensure the correct assembly. If the clutch pedal shaft arm is installed in a position other than the one from which it was removed, the
clutch release lever travel will increase or decrease resulting in a misadjusted clutch pedal.
1. Remove one nut (1), one bolt (1) and the clutch pedal shaft arm (2) from the clutch pedal shaft (3).
2. Remove the clutch pedal return spring (1) from the brake pedal bracket (2).
3. Push the clutch pedal (2) in to clear the Electronic Brake Control Module (EBCM) (1) and slide the clutch pedal (2) to the left (if equipped).