Tracker 4WD L4-1.6L VIN 6 (1998)
4. Remove the clutch pedal (11), clutch pedal return spring lever (8) and the clutch pedal return spring (10) from the brake pedal bracket (12).
5. Remove the clutch pedal shaft bushings (1) from the brake pedal bracket (2).
6. Inspect the clutch pedal shaft (9) and clutch pedal shaft bushings (1) for excessive wear. Replace as necessary.
7. Inspect the clutch pedal lever for distortion or bending. Replace as necessary.
8. Inspect the clutch pedal return spring (10) for distortion or weakness. Replace as necessary.
INSTALLATION PROCEDURE
1. Install the clutch pedal shaft bushings (1) into the brake pedal bracket (2).
2. Apply a thin coat of lithium grease to the inside of the clutch pedal shaft bushings (1).
3. Install the clutch pedal (11), the clutch pedal return spring lever (8) and the clutch pedal return spring (10) into the brake pedal bracket (2).
