Tracker 4WD L4-1.6L VIN 6 (1998)
4. Install the clutch pedal return spring (1) to the brake pedal bracket (2).
5. Install the clutch pedal shaft arm (2) onto the clutch pedal shaft aligning index marks made during removal; secure with one bolt (1) and one nut
(1).
^
Tighten the clutch pedal shaft arm bolt and nut to 24 Nm (17 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: For clutch adjustment procedures, refer to Clutch Pedal Height Adjustment and Clutch Pedal Free Travel Adjustment.