Tracker 4WD L4-1.6L VIN 6 (1998)
10. Inspect the sliding yoke splines (1) for excessive wear or damage. If the splines (1) appear worn or rounded, replace the sliding yoke (3). Refer to
Universal Joints Replacement (Sliding Yoke Joint) in Universal Joint, Drive/Propeller Shaft.
11. Inspect the sliding yoke surface for the following:
^
Scoring
^
Burrs
^
Other damage
If the sliding yoke surface appears scored or rough, replace the sliding yoke. Refer to Universal Joints Replacement (Sliding Yoke Joint) in
Universal Joint, Drive/Propeller Shaft.
12. Inspect the pinion flange yoke for the following:
^
Cracks
^
Distortion
^
Other damage
If the pinion flange yoke appears damaged or distorted, replace the pinion flange yoke. Refer to Universal Joints Replacement (Pinion Flange
Yoke Joint) in Universal Joint, Drive/Propeller Shaft.
INSTALLATION PROCEDURE.