Tracker 4WD L4-1.6L VIN 6 (1998)
9. Install the locking hub cover onto the locking hub body.
Ensure that the index key (1) the locking hub cover (2) aligned with the notched portion in the locking hub body.
10. Secure the locking hub cover with Allen head bolts.
^
Tighten the locking hub cover bolts to 33 Nm (24 ft. lbs.).
11. Install the right front tire and wheel assembly. Refer to Wheel Installation.
12. Install the front skid plate to the vehicle (if the vehicle is equipped).
13. Secure the front skid plate with four bolts.
^
Tighten the four skid plate bolts to 54 Nm (40 ft. lbs.).
14. Lower the vehicle.