Tracker 4WD L4-1.6L VIN 6 (1998)
Axle Shaft Assembly: Service and Repair
Rear Drive Axle
REAR DRIVE AXLE
REMOVAL PROCEDURE
^
Tools Required
-
J 34866 Rear Axle Shaft Remover
-
J 2619-01 Slide Hammer
-
J 22912-01 Rear Bearing Remover
1. Raise the vehicle. Support the vehicle. Refer to Vehicle Lifting Points.
2. Place a drain pan or suitable container under the rear axle housing.
3. Remove the rear axle housing oil level/filler plug (1) from the rear axle housing.
4. Remove the rear axle housing drain plug (2) from the rear axle housing and drain the rear axle housing.
5. Remove the rear tire and wheel assembly. Refer to Wheel Removal in Tires and Wheels.
6. Remove the rear brake drum from the rear axle. Refer to Brake Drum Replacement in Brakes.
7. Remove the rear antilock brake shoe return spring (2) from both rear brake shoes.