Tracker 4WD L4-2.0L VIN C (1999)
Brake Master Cylinder: Service and Repair
Master Cylinder Reservoir Replacement
REMOVAL PROCEDURE
CAUTION: Refer to Brake Fluid Irritant Caution in Service Precautions.
NOTICE: Refer to Brake Fluid Damage to Electrical Connections Notice in Service Precautions.
1. Disconnect the reservoir fluid level connector (2).
2. Clean the outside of the reservoir.
3. Remove the reservoir cap (1).
4. Remove the reservoir diaphragm.
5. Remove the fluid with a syringe.
6. Remove the reservoir pin (5) using a drift.
7. Remove the reservoir (2).
8. Remove the reservoir grommets (3).
INSTALLATION PROCEDURE
CAUTION: Refer to Brake Fluid Caution in Service Precautions.
NOTICE: Refer to Filling the Master Cylinder Notice in Service Precautions.