Tracker 4WD L4-2.0L VIN C (1999)
1. Lubricate new grommets (3) with Delco Supreme 11 brake fluid, GM P/N 12377967, or equivalent DOT-3 brake fluid. Press-fit the grommets to
the master cylinder (4), and seat the grommets in place.
IMPORTANT: Insert the reservoir pin until both of its ends at the right and the left of the reservoir become the same length.
2. Install the reservoir. Secure with the reservoir pin (5).
3. Install the reservoir diaphragm.
4. Fill the reservoir.
5. Install the reservoir cap (1).
6. Inspect for fluid leakage.
7. Connect the reservoir fluid level connector (2).
