Tracker 4WD L4-2.0L VIN C (1999)
10. Remove the two nuts and/or two bolts (1) from the throttle body.
11. Remove the throttle body (2) and gasket (3) from the intake manifold (4).
12. Clean any throttle body gasket material (2) that remains on the intake manifold (1).
INSTALLATION PROCEDURE
1. Install a new gasket (3) and the throttle body (2) onto the intake manifold (4).
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Secure the throttle body to the intake manifold with the two nuts and/or two bolts (1).
Tighten
Tighten the bolts to 25 N.m (18 lb ft).
