Tracker 4WD L4-2.0L VIN C (1999)
Connect the Tech 2 to the vehicle data link connector (DLC), with the engine and the Tech 2 OFF.
A. Turn ON the Tech 2.
B. Press Enter at the title screen.
C. Turn ON the ignition, with engine OFF.
D. Select Service Programming System at the Main Menu.
Important: Select Request Info Again if a vehicle identification (VIN) was previously stored in the Tech 2.
Select Request Info.
E. Enter the vehicle description by following the on-screen instructions.
F. Turn OFF all accessories and select Continue.
Important: The correct VIN must be entered if the vehicle identification number (VIN) does not appear correctly.
Important: If the vehicle is equipped with the original factory control module, no VIN will be stored.
Verify that the correct VIN is entered on the Tech 2 and select Yes.
2. Turn OFF the Tech 2.
3. Disconnect the Tech 2 from the vehicle.
4. Turn OFF the ignition.