Tracker 4WD L4-2.0L VIN C (1999)
2. Disconnect C210. Refer to Main Harness Routing View in Diagrams.
3. Disconnect C212. Refer to Main Harness Routing View in Diagrams.
4. Disconnect C2, C3 and C4 from the powertrain control module (PCM).
5. Remove the harness from the interior of the vehicle. Push the harness through the bulkhead grommet P100 into the engine compartment.
6. Remove the harness from the retainers.
7. Remove the harness (2) from the vehicle.
INSTALLATION PROCEDURE
1. Refer to Harness Routing Views in Diagrams.
Position the harness (2) in the engine compartment.
2. Install the harness to the retainers.
3. Push the harness through the bulkhead grommet P100 into the interior of the vehicle.
4. Connect C210. Refer to Main Harness Routing View in Diagrams.
5. Connect C212. Refer to Main Harness Routing View in Diagrams.
6. Connect C2, C3 and C4 to the PCM.
