Tracker 4WD L4-2.0L VIN C (1999)
8. Remove the 2 strut bracket nuts (2) and the 2 strut bracket bolts (1). Hold the strut by hand so that the strut will not fall.
9. Remove the 3 strut support nuts.
10. Remove the strut.
INSTALLATION PROCEDURE
NOTICE: Refer to Fastener Notice in Service Precautions.
1. Install the strut. Holding the strut in place, install the 3 strut support nuts (1).
-
Tighten the strut support nuts to 55 Nm (40.0 ft. lbs.).