Tracker 4WD L4-2.0L VIN C (1999)
2. Install the 2 strut bracket bolts (1) to the strut bracket and the knuckle. Secure the strut to the knuckle with 2 strut bracket nuts.
-
Tighten the strut bracket nuts to 95 Nm (69.0 ft. lbs.).
3. If equipped with ABS, install the bolt (1) to the harness clamp of the front wheel speed sensor.
IMPORTANT: DO NOT twist the hose during installation.
4. Install the brake hose (3) to the strut bracket (2).
5. Install the tire and wheel assembly.
