Tracker 4WD L4-2.0L VIN C (1999)
Installation Procedure
1. Install the select lever assembly.
2. Install the select indicator assembly.
3. Install the knob.
4. Install the 2 knob screws.
5. Put the manual shift lever (3) in the LOW position.
6. Install the shift select cable (4) into the shift select cable bracket at the transmission.
7. Secure the shift select cable (4).
8. Install the shift select cable into the manual shift lever while moving the manual shift lever back to the NEUTRAL position.
Notice: Refer to Fastener Notice in Service Precautions.