Tracker 4WD L4-2.0L VIN C (1999)
10. Remove the valve body (14) from the transmission. Refer to Valve Body and Accumulator Pistons Removal.
11. Remove the TV cable (3) case from the transmission.
12. Inspect the TV cable for fraying or kinks.
13. Replace the cable as necessary.
14. Inspect the TV cable O-ring (1) for damage. Replace the O-ring if necessary.
Installation Procedure
1. Attach the TV cable (2) to the transmission.
2. Attach the TV cable (2) to the TV cable cam (3) while installing the valve body.
3. Install the valve body (14) in the transmission. Refer to Valve Body and Accumulator Pistons Removal.
4. Install the transmission range switch. Refer to Transmission Range Switch Replacement