Tracker 4WD L4-20L VIN C Differential Cover Service & Repair
36. Install the nuts to the upper control arm (3).
^
Tighten the bolts and nuts to 90 Nm (66 ft. lbs.).
37. Install the the 2 nuts and the washers (one on each side) to the lower control arm (5).
^
Tighten the bolts and nuts to 90 Nm (66 ft. lbs.).
38. Install the nut to the rear axle tie rod (4).
^
Tighten the bolt and the nut to 90 Nm (65 ft. lbs.).
39. Install the 2 nuts and the washers to the lower rear shock absorber (9).
^
Tighten the lower rear shock absorber through bolts and nuts to 85 Nm (63 ft. lbs.).
