Tracker 4WD L4-2.0L VIN C (1999)
1. Install the sliding yoke (2) into the transmission (3).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the pinion flange yoke (4) to the differential pinion flange (3) aligning the reference marks (2) on the pinion flange yoke (4) and the
differential pinion flange (3). Secure the pinion flange yoke (4) with 4 bolts and 4 nuts.
^
Tighten the propeller shaft bolts and nuts to 50 Nm (37 ft. lbs.).