Tracker 4WD V6-2.5L VIN 4 (2001)
Console: Service and Repair
Console Replacement - Front Floor
REMOVAL PROCEDURE
1. Remove the rear floor console.
2. Remove the 2 screws and the 2 plastic retainers which secure the front floor console.
3. Lift the console.
4. Disconnect the power/normal switch electrical connector, if equipped with the 4-speed A/T.
5. Remove the front floor console from the vehicle.
INSTALLATION PROCEDURE
1. Connect the power/normal switch electrical connector, if equipped with the 4-speed A/T.
2. Install the front floor console to the vehicle.
Secure the console with the 2 screws and the 2 plastic retainers.
3. Install the rear floor console.