Tracker 4WD V6-2.5L VIN 4 (2001)
9. Remove the lower radiator hose.
10. Lower the vehicle then remove the radiator overflow hose.
11. Remove the upper radiator hose.
12. Remove the 2 upper radiator shroud clips.
13. Remove 1 bolt from each side of the radiator.
Important: Do not damage the radiator on the fan during removal.
14. Lean the fan shroud toward the engine and lift the radiator up and out of the vehicle.
Installation Procedure
Important: Do not damage the radiator on the fan during installation.
1. Install the radiator and secure with 1 bolt on each side of the radiator.