Tracker 4WD V6-2.5L VIN 4 (2001)
2. Install the 2 upper radiator shroud clips.
3. Install the upper radiator hose.
4. Install the radiator overflow hose.
5. Raise and properly support the vehicle. Refer to Vehicle Lifting.
6. Install the lower radiator hose.
7. Install the transmission oil cooler lines (1) to the bottom of the radiator (automatic transmission only).
8. Install the 2 lower radiator shroud clips.
9. Lower the vehicle.
10. Fill the cooling system.
11. Connect the negative battery cable.
12. Run the engine and inspect for the following:
-
Coolant leaks
-
Correct cooling level
-
Automatic transmission fluid leaks
-
Correct automatic transmission fluid level