Tracker 4WD V6-2.5L VIN 4 (2001)
4. Loosen the accelerator control cable locknut (3) and the accelerator control cable adjusting nut (2).
5. Remove the accelerator control cable (1) from the vehicle.
INSTALLATION PROCEDURE
1. Install the accelerator control cable (1) to the cable bracket.
2. Rotate the throttle lever (1) to the WOT position.
3. Insert the accelerator control cable end into the throttle lever slot (2).
4. Install the accelerator control cable (1) into the bracket and secure with the cable locknut (3) and the cable adjusting nut (2). Do not tighten fully.