TrailBlazer 2WD L6-4.2L VIN S (2003)
NOTICE: Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
6. While still holding the flywheel, install the balancer washer and a new bolt.
Tighten the crankshaft balancer bolt to 150 Nm (110 ft. lbs.). Use the J 45059 in order to tighten the balancer bolt an additional 180°.
7. Remove the torque converter holding tool.
8. Install the torque converter access plug into the oil pan.
9. Lower the vehicle.
10. Install the drive belt.
11. Install the radiator.
