Traverse FWD V6-3.6L (2009)
5. Install the new retainers to the carpet by reaching under the carpet to position the bottom retainer, and pressing the top retainer downward to
engage the two halves of the retainer together.
6. Placing a wood block, socket or other appropriate tool under the carpet for support, firmly push down on the retainer until the halves snap together
with an audible click. Ensure that the two halves are properly seated as shown above.
7. Reinstall the left front carpet retainer following SI.
8. Reposition the floor mat to the carpet and latch the quarter turn retainer.
Left 2nd Row Seat Location
1. Position the driver's seat forward and the left 2nd row seat fully rearward.
2. Unlatch the floor carpet quarter turn retainer and position the floor mat out of the way.
3. Remove the rear seat track front outboard cover following SI.
4. To access the underside of the carpet, remove the center pillar lower garnish molding following SI.
5. Remove the retainer from the carpet by gently prying apart the halves from the top side. Remove the bottom half of the retainer from underneath
the carpet.
6. Install the new retainers to the carpet by reaching under the carpet to position the bottom retainer, and pressing the top retainer downward to
engage the two halves of the retainer together.
7. Placing a wood block, socket or other appropriate tool under the carpet for support, firmly push down on the retainer until the halves snap together
with an audible click. Ensure the two halves are properly seated, as shown above.
8. Reinstall the seat track cover and the center pillar lower garnish molding following SI.
9. Reposition the floor mat to the carpet and latch the quarter turn retainer.
Center 2nd Row Seat Location
1. Position the front passenger seat forward and the right 2nd row seat fully rearward.
2. Unlatch the floor carpet quarter turn retainer and position the floor mat out of the way.
3. Remove the rear seat track front inboard cover following SI.