Traverse FWD V6-3.6L (2009)
2. Position the left secondary camshaft drive chain shoe. See: Service and Repair/Overhaul/Repair Instructions/115. Secondary Camshaft Drive
Chain Shoe Installation - Left Side
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners
requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use
paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint
clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid
damage to parts and systems.
3. Install the secondary camshaft drive chain shoe bolt.
Tighten the secondary camshaft drive chain shoe bolt to 23 Nm (17 lb ft).
4. Install the left bank secondary camshaft drive chain tensioner. See: Service and Repair/Overhaul/Repair Instructions/116. Secondary Camshaft
Drive Chain Tensioner Installation - Left Side
