Traverse FWD V6-3.6L (2009)
Air Filter Element: Service and Repair
Air Cleaner Element Replacement
Removal Procedure
1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (See: Fuel Delivery and Air Induction/Fuel
Injector/Service and Repair/Fuel Injector Sight Shield Replacement).
2. Disconnect the positive crankcase ventilation (PCV) fresh air tube from the camshaft cover fitting (1).
3. Disconnect the PCV quick disconnect (2). Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel Delivery and Air Induction/Fuel Line
Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
4. Disconnect the engine wiring harness electrical connector from the mass airflow (MAF)/intake air temperature (IAT) sensor.
5. Loosen the air cleaner outlet duct clamp (1) at the throttle body.
6. Loosen the 6 air cleaner housing cover screws (2).
7. Separate the air cleaner outlet duct from the throttle body.
