Traverse FWD V6-3.6L (2009)
14. Install the starter heat shield and bolt.
Tighten the bolt to 7 Nm (62 lb in).
15. Install the left catalytic converter. Refer to Catalytic Converter Replacement - Left Side (See: Engine, Cooling and Exhaust/Exhaust
System/Catalytic Converter/Service and Repair/Catalytic Converter Replacement - Left Side).
16. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement).
17. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Service and Repair).
