300 V6-3.5L (2008)
EGR Tube: Service and Repair
EGR Tube - Installation
3.5L
1. Clean mounting surface.
2. Install new rubber silicone seals on intake manifold end of EGR tube.
3. Lubricate the EGR mounting tube hole in the intake manifold with clean soapy water. Do not lubricate the EGR tube or seal.
4. Install tube into the intake manifold being careful that the silicone rubber seals are correctly installed and undamaged.
5. Install the tube bolts to EGR valve.
6. Tighten the EGR tube to EGR valve bolts (1). Tighten to 15 Nm (11 ft. lbs.) torque.