300 SRT-8 V8-6.1L VIN W (2005)
REPAIR PROCEDURE:
1.
Open the trunk lid.
2.
Pull the trunk carpet away from one side of the trunk.
3.
Remove the push pin (located above and rearward of the body exhauster) attaching the fascia to the body side, by pushing out the center (white)
pin with a punch, then push (black) body through hole, (Fig. 2). Pin and body will fall to the ground under the rear fascia.
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
Technical Service Bulletin # 23-052-05
Date:
051104
Body - Gap Between Rear Fascia & Body Side/Tail Lamp
NUMBER: 23-052-05
GROUP: Body
DATE: November 4, 2005
THIS BULLETIN IS BEING PROVIDED IN ADVANCE. DO NOT ORDER PARTS OR PERFORM ANY ACTIONS RELATED TO THIS
BULLETIN UNTIL NOVEMBER 21, 2005.
SUBJECT:
Rear Fascia To Body Side/Tail Lamp Fit
OVERVIEW:
This bulletin involves adding two nut and bolt attachments to the rear fascia.
MODELS:
2005 - 2006
(LX/LE)
300/Charger
SYMPTOM/CONDITION:
The gap between rear fascia and body side/tail lamp is more than 2 mm (5/64 in).
DIAGNOSIS:
If gap between rear fascia and body side/tail lamp measures more than 2 mm (5/64 in), (Fig. 1), perform the Repair Procedure.