300 SRT-8 V8-6.1L VIN W (2005)
Hood Stop: Service and Repair
BUMPER-ADJUSTMENT
REMOVAL
1. Open and support the hood.
2. Unscrew the hood adjustment bumper(s) (1) from the mounting hole(s) in the top of the headlamp mounting crossmember (2).
3. Remove the adjustment bumper(s) from the vehicle.
INSTALLATION
1. Install the hood adjustment bumper(s) (1) into the mounting hole(s) located in the top of the headlamp mounting crossmember (2).
2. Adjust the adjustment bumper(s) in or out of the crossmember as necessary to achieve proper hood alignment.