300 SRT-8 V8-6.1L VIN W (2005)
Hood Striker: Service and Repair
LATCH STRIKER
REMOVAL
1. Open and support the hood (3).
2. Remove the two screws (2) that secure the latch striker (1) to the hood inner reinforcement.
3. Remove the striker from the vehicle.
INSTALLATION
1. Position the latch striker (1) to the underside of the hood (3).
2. Install and tighten the two screws (2) that secure the striker to the hood inner reinforcement. Tighten the screws to 28 N.m (21 ft.lbs.).
3. Close the hood.