300 SRT-8 V8-6.1L VIN W (2005)
2. Check to be certain that the grommet (2) for the front tether of the side curtain airbag is properly installed and in good condition. Replace the
grommet if any damage is evident. Refer to Air Bag.
3. Engage the base of the A-pillar trim (1) to the end of the instrument panel top cover.
4. Align the two spring clip retainers on the trim with the slots in the inner A-pillar (3).
5. Using hand pressure, press firmly and evenly forward on the trim over each of the spring clip locations until the retainers snap into place.
B-Pillar Trim
B-PILLAR TRIM
REMOVAL
LOWER
1. Loosen the front door sill portion of the lower cowl trim at the rear of the front door opening for access to the forward lower B-pillar trim screw.
Refer to Trim Panel.
2. Loosen the front of the scuff plate trim from the rear door sill for access to the rearward lower B-pillar trim screw. Refer to Trim Panel.
3. Move aside the seat belt webbing to access and remove the two screws (2) that secure the upper end of the lower B-pillar trim (3) to the inside of
the B-pillar (1).
4. Remove the two screws (4) that secure the lower end of the B-pillar trim to the front and rear door sills.
5. Disengage the seat belt webbing from the slot in the upper end of the lower B-pillar trim through the slit in the trim and remove the trim from the
inside of the B-pillar.
UPPER