300 SRT-8 V8-6.1L VIN W (2005)
1. Align ABM solenoids and pump/motor wiring connector (4) with HCU valves (2) and connector passage. Slide ABM (1) onto HCU (3).
2. Install three screws (2) attaching ABM (1). Tighten screws to 2 Nm (17 inch lbs.) torque.
3. Attach mounting bracket to HCU. Install two mounting bracket attaching screws and tighten to 11 Nm (97 inch lbs.) torque.
4. Install ICU in vehicle.