300 SRT-8 V8-6.1L VIN W (2005)
10. Install wheel speed sensor head (4) into knuckle and install mounting screw (3). Tighten screw to 11 Nm (95 inch lbs.) torque.
11. Attach wheel speed sensor cable and routing clip (2) to brake flex hose routing bracket (5).
12. Install tire and wheel assembly (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) torque.
13. Lower vehicle.
14. Pump brake pedal several times to ensure vehicle has a firm brake pedal before moving vehicle.
15. Check and adjust brake fluid level in reservoir (1) as necessary.
16. Perform wheel alignment.