300 SRT-8 V8-6.1L VIN W (2005)
Seals and Gaskets: Service and Repair
Rear Axle - 198RII
Seal - Axle Shaft
SEAL-AXLE SHAFT
REMOVAL
1. Remove halfshaft(s).
2. Using suitable screwdriver (1), remove axle shaft seal (2).
3. Visually inspect halfshaft seal journal for damage (excessive seal groove, nicks, scratches, etc. Replace halfshaft if necessary.
INSTALLATION
1. Using Tool 9223 (2), install NEW axle shaft seal (1). Lubricate the inside diameter with Mopar Gear and Axle Lubricant 75W-140 to protect seal
during halfshaft installation.
2. Install halfshaft(s).