300 SRT-8 V8-6.1L VIN W (2005)
3. Remove fill plug (1) to check and adjust rear axle fluid level. Top off axle with Mopar Gear and Axle Lubricant 75W-140. Reinstall fill plug
torque to 60 Nm (44 ft. lbs.) torque.
Seal - Pinion Flange
SEAL-PINION FLANGE
REMOVAL
1. Remove rear axle assembly from vehicle. Refer to Rear Axle Removal.
2. Measure axle assembly rotating torque and record measurement for reuse on assembly.
3. Using flange holder C-3281(1) and 41 mm socket, remove pinion flange nut and discard.