Concorde V6-2.7L VIN V (2001)
EGR Tube: Service and Repair
UPPER TUBE
REMOVAL
Fig. 1 EGR Tube
The EGR tube attaches to the intake manifold plenum on both sides of the throttle body and the EGI valve.
1. Disconnect negative battery cable.
2. Remove air inlet tube and resonator.
3. Remove throttle cable bracket and reposition.
Fig. 2 PCV Valve
4. Remove EGR tube mounting screws at intake manifold plenum.
5. Remove EGR tube mounting screws at EGR valve.
6. Remove EGR upper tube.
7. When removing EGR upper tube assembly being careful not to drop the silicone rubber seals in the intake manifold. Clean gasket surfaces on the
EGR valve. Note that any loose dirt can lodge between the pintle and the seat and cause valve leakage that will give a rough idle and depressed
manifold vacuum.
INSTALLATION