Concorde V6-2.7L VIN V (2001)
10. Loosely install the bolts mounting the left side of the steering gear to the crossmember.
CAUTION: Tightening the steering gear to crossmember mounting bolts to the proper torque is very important.
11. Install the bolts mounting the right side mounting bracket for the steering gear to the crossmember. Tighten the mounting bolts to a torque of 58
Nm (43 ft. lbs.).
12. Tighten the bolts mounting the left side of the steering gear to the crossmember to a torque of 58 Nm (43 ft. lbs.).