Concorde V6-2.7L VIN V (2001)
13. If previously loosened, tighten the bolts mounting the steering gear mounting bracket to the right side of the steering gear to a torque of 37 Nm (27
ft. lbs.).
CAUTION: Before installing tie rods on steering gear be sure the tie rod spacer block inside the steering gear bellows (boot) is correctly aligned with
the bolt holes in the rack of the steering
cr01cncrd_19-036c
14. Attach power steering fluid pressure, and return lines into proper ports of the steering gear. Tighten both power steering hose tube nuts to a torque
of 47 Nm (35 ft. lbs.).
