Crossfire V6-3.2L VIN L (2004)
1. Install the hood latch release cable (1) between the headlamp and the upper frame cross member.
2. Install the hood latch (6).
3. Install the cover.
4. Install the clip on the frame cross member.
5. Install the upper frame cross member.
6. Install the wire to the grommet (3) on the hood latch release cable (2).
NOTE: Insure that hood latch release cable grommet is properly seated in the bulkhead.
7. Push the cable grommet into the bulkhead below the fuse box.
8. Install the handle (1) to the arresting mechanism in the cover and hook the hood latch release cable to the handle.
9. Install the screw on handle (1).
10. Close the hood and check for proper operation.
