Crossfire V6-3.2L VIN L (2004)
5. Remove the timing chain crankshaft sprocket (2).
6. Clean and inspect all gasket surfaces, chain guides, and sprockets for wear or damage. Repair or replace as necessary.
INSTALLATION
1. Invert the engine on the engine stand.
2. Install the crankshaft sprocket (2).
3. Ensure the crankshaft has maintained 40 °ATDC. If not, rotate until aligned with 40° marking.
4. Align the balance shaft sprocket with the timing mark (3) and the copper teeth (1) of the timing chain.
