Lebaron Sedan L4-134 2.2L VIN C 2-bbl (1984)
14.
Install the left body splash shield.
15.
Install the valve body and a new oil filter.
16.
Install transaxle oil pan.
17.
IMPORTANT: Inspect the bushing surface of the right drive shaft inner bushing. Replace the housing if bushing surface is scored or otherwise
damaged. If the bushing surface appears to be OK, then polish the surface with 320 grit or finer crocus cloth.
Clean the housing thoroughly and install the drive shaft.
18.
Install the lower control arm ball joints and through bolts.
19.
Reinstall the speedometer cable adapter.
20.
Install front tire and wheel assemblies.
21.
Lower vehicle.
22.
Reinstall shift linkage and check adjustment.
23.
Connect battery.
24.
Refill transaxle with ATF per service manual instructions and check for leaks.
POLICY:
Reimbursable within the provisions of the warranty
