New Yorker V6-201 3.3L VIN R FI (1992)
should be replaced.
Fig. 35 Measuring Outer Rotor Thickness
3.
Measure thickness and diameter of outer rotor. If outer rotor thickness measures .3005 inch (7.36 mm) or less, or if the diameter is 3.141 inches
(79.78 mm) or less, replace outer rotor.
Fig. 36 Measuring Inner Rotor Thickness
4.
If inner rotor thickness measures 0.301 inch (7.64 mm) or less, replace inner rotor and shaft assembly.
Fig. 37 Measuring Outer Rotor Clearance In Case
5.
Install outer rotor into CCC, press one side with fingers and measure clearance between outer rotor and CCC. If measurement is .022 inch (56 mm)
or more, replace CCC only if outer rotor is within specifications.
Fig. 38 Measuring Clearance Between Rotors
6.
Install inner rotor into CCC, then measure clearance between inner and outer rotors. If clearance measured between rotors is .008 inch (.203 mm)
or more, replace both rotors.
