Pacifica V6-3.8L (2008)
15. Remove two mounting bolts (3) and one nut (2), then remove parking brake lever (4) from cowl (1) and place it on driver's floor.
NOTE: Prior to removing cable from lever, note cable routing through lever for ease in reassembly.
16. Remove front cable button (1) from lever take-up reel (2).
17. Remove cable from cam on lever and slide it down into the cable housing until the cable end button contacts the housing.
18. Place a 13 mm 12-point box wrench (2) over cable retainer (1) on end of cable housing and collapse retainer fingers.
19. Separate front parking brake cable from lever (3) and remove lever.