Pacifica V6-3.8L VIN L (2005)
![background image](/chrysler/pacifica/v6-3.8l_vin_l/Page-1852001.png)
Antenna Cable: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove right side cowl trim.
3. Remove right side front and rear sill scuff plates.
4. Remove right side quarter trim panel.
5. Remove liftgate scuff plate.
6. Remove navigation unit.
7. Disconnect antenna cable at instrument panel. Remove cable from retainers on floor. Disconnect antenna cable from navigation unit.
INSTALLATION
1. Connect antenna cable at instrument panel. Install cable to retainers on floor. Connect antenna cable to navigation unit.
2. Install navigation unit.
3. Install liftgate scuff plate.
4. Install quarter trim panel.
5. Install front and rear scuff plates.
6. Install side cowl trim.
7. Connect battery negative cable.