Pacifica V6-3.8L VIN L (2005)
Driver/Vehicle Information Display: Service and Repair
Setting Transmitter Codes
1. Turn off the engine.
2. Erase the codes by pressing the two outside buttons labeled with one (.) and three (...) dots. Release the buttons when the display confirms the
operation (about 20 seconds).
3. Choose one of the three buttons to train. Place the hand-held transmitter within one inch of the universal transmitter and push the buttons on both
transmitters.
4. Release both buttons. Your universal transmitter is now "trained". To train the other buttons, repeat Step 3 and Step 4. Be sure to keep your hand
held transmitter in case you need to retain the universal transmitter.
NOTE: For more detailed instructions refer to the owners manual procedure in the vehicles glove box.