Pacifica V6-3.8L VIN L (2005)
-
Driver Door Module
VEHICLE INFORMATION DISPLAY
NOTE: The EVIC will not display information for any of the screens for which it did not receive the proper PCI Bus data.
The EVIC displays the following functions:
-
Compass direction
-
Language type
-
Distance to empty
-
Average fuel economy
-
Distance to service
-
Customer programmable Features
The EVIC displays various memory functions based on a PCI bus message from the Driver Door Module (DDM). The EVIC will also display the
following driver alert messages with either an amber or red priority indicator lamp:
-
TURN SIGNAL ON
-
PERFORM SERVICE
-
DOOR AJAR (individual or multiple doors)
-
LOW or HIGH TIRE(S) PRESSURE (when equipped)
-
PEDAL ADJUST DISABLED CRUISE ENGAGED (when equipped)
-
PEDAL ADJUST DISABLED VEHICLE IN REVERSE (when equipped)
-
WASHER FLUID LOW
-
LOW BRAKE FLUID
-
LOW FUEL
-
MENU IN PARK ONLY (when equipped)
-
PUT IN PARK FOR LIFTGATE (when equipped)
-
TCS ACTIVE (when equipped)
-
SERVICE TCS SYSTEM (when equipped)
-
SERVICE TIRE PRESSURE SYSTEM (when equipped)
-
TIRE PRESSURE UNAVAILABLE (when equipped)
-
SET INHIBITED DUE TO MOTION (when equipped) An audible chime or chimes will accompany any warning messages. Chime requests with
an OPEN message are dependent upon vehicle speed.
The EVIC receives the following messages from the Body Control Module (BCM):
-
Verification of US/Metric status
-
Fuel Economy (Average and Instantaneous)
-
Distance to empty
-
Distance to service
-
Driver warning messages
The EVIC receives the Vehicle Speed message from the powertrain control module.
The EVIC transmits the Current Display message to the BCM.
STEP BUTTON
Use the STEP Button to:
1. Sequentially select one of the displays or blank display in the following order:
-
Average Fuel Economy
-
Distance to Empty
-
Distance to Service Message
-
Off (Blank)
2. Set the magnetic variance zone when VARIANCE =X (X =1 -15) is indicated in the VF Display.
3. Select the displayed programmable feature setting. (When equipped.)
MENU BUTTON (EVIC only)
Use the MENU button to sequentially step the EVIC through the programmable features. For complete information of the programmable features and
memory messages, refer to the Owner's Manual.
RESET BUTTON