Pacifica V6-3.8L VIN L (2005)
![background image](/chrysler/pacifica/v6-3.8l_vin_l/Page-2010001.png)
Front Bumper Reinforcement: Service and Repair
FRONT BUMPER REINFORCEMENT
REMOVAL
1. Remove front bumper fascia. Refer to Front Bumper.
2. Support front bumper reinforcement on a suitable lifting device.
Fig. 1
3. Remove the three bolts attaching front bumper reinforcement to frame rail (Fig. 1).
4. Remove front bumper reinforcement from vehicle.
INSTALLATION
1. Place front bumper reinforcement into position on vehicle.
2. Install the three bolts attaching front bumper reinforcement to frame rail and tighten to 20 N.m (15 ft.lbs.). (Fig. 1).
3. Install front bumper fascia.