chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Body/Frame - Vibration/Shake While Driving|Page 7356 > < Body/Frame - Vibration/Shake While Driving|Page 7354
Page 4
background image

a. Yes >>> Proceed to Step # 3.

b. No >>> Continue further diagnosis this bulletin does not apply.

3. Remove and Replace Cradle, Front Suspension. Refer to the detailed removal/installation procedures available in DealerCONNECT >

TechCONNECT under: Service Info > 13- Frames and Bumpers > Frame > Engine Cradle Crossmember > Removal/Installation > Front
Crossmember.

4. Return the vehicle to the customer.

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

FAILURE CODE:

Disclaimer:

This bulletin is supplied as technical information only and is not an authorization for repair.

Technical Service Bulletin # 13-001-10

Date: 

101026

Steering/Susp./Frame - Vibration/Shake While Driving

NUMBER: 13-001-10

GROUP: Frames & Bumpers

DATE: October 26, 2010

NOTE:

This only applies to vehicles in the Canadian Market and in salt belt states which include Connecticut, Delaware, Illinois, Indiana, Iowa, Maine,
Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia
and Wisconsin.

SUBJECT:
Vehicle Vibration and/or Shake

OVERVIEW:
This bulletin involves inspecting the engine cradle for perforation and if necessary replace.

MODELS:

2004-2005

CS

Pacifica

SYMPTOM/CONDITION:
The customer may experience a vehicle vibration and/or shake.

DIAGNOSIS:
If the symptom condition is experienced proceed to the repair procedure.

Body/Frame - Vibration/Shake While Driving|Page 7356 > < Body/Frame - Vibration/Shake While Driving|Page 7354