Pacifica V6-3.8L VIN L (2005)
Fig. 3
5. Remove shoulder belt bezel from trim cover (Fig. 3).
6. Remove screw attaching trim cover to B-pillar from inside bezel cavity.
7. Disengage hidden clips attaching trim cover to B-pillar.
8. Remove B-pillar trim cover from vehicle.
INSTALLATION
1. Insert seat belt through B-pillar trim and web guide (Fig. 3).
2. Place B-pillar trim cover in position on vehicle.
3. Engage hidden clips attaching trim cover to B-pillar.
4. Install shoulder belt bezel into trim cover.
5. Install height adjuster knob.
6. Install shoulder belt turning loop onto height adjuster. Tighten bolt to 39 N.m (29 ft.lbs.) torque.
7. Place seat anchor in position on floor so webbing is pointed rearward and slightly outboard.
8. Install bolt attaching lower seat belt anchor to floor. Tighten seat belt bolt to 39 N.m (29 ft.lbs.) torque.
C-Pillar Trim
C - PILLAR UPPER TRIM PANEL
REMOVAL
1. Open rear door and liftgate.
2. Fold door first row and second row seats to access upper trim panel
3. Remove rear header trim. Refer to Trim Panel.
4. Remove D-pillar trim panel. Refer to Trim Panel.
5. Remove lower D-pillar seat belt anchor.