Pacifica V6-3.8L VIN L (2005)
4) Install disc brake caliper over brake shoes on brake caliper adapter.
5) Align caliper guide pin bolt holes with guide pins, then install caliper guide pin bolts (Fig. 6). Tighten upper (closest to bleeder screw) bolt to 43
Nm (32 ft. lbs.) torque, then tighten lower bolt to 43 Nm (32 ft. lbs.) torque.
6) Install tire and wheel assembly. Tighten wheel mounting nuts to 135 Nm (100 ft. lbs.) torque.
7) Lower vehicle.
8) Pump brake pedal several times to set shoes to caliper and brake rotor.
9) Check and adjust brake fluid level as necessary.
10) Road test vehicle making several stops to wear off any foreign material on brakes and to seat brake shoes.